Helpful Hints

For Anodized Aluminum With Rough Blisters Of Corrosion

Allow Woody Wax to remain on the metal for 24 hours.

A piece of fine bronze wool sprayed with Woody Wax will break down corrosion spots rapidly without hurting the anodizing. It may take several applications to fully restore the aluminum but you should see improvement with each coat. When visible improvement stops coat your aluminum with Woody Wax Metal Sealant to lock in corrosion blocking protection for six months or more.

For Oxidized Anodized Aluminum That Is Smooth But Dull:

For aluminum that is not blistered, but is extremely dull from oxidation try putting a small amount of Ultra-Gloss Compound on the cloth with the Woody Wax while applying it to the metal. Work with very little pressure and follow the curve of the metal on pipes and follow the length of the metal on flat pieces. You should see a great improvement. Then seal with Woody Wax Metal Sealant for lasting protection.

Outriggers:

Probably the most abused metals on your boat your outriggers. With no protection from the sun, salt, weather, and pollution, outriggers are punished and rarely rinsed off properly. While almost never shammied dry or waxed above an arms length, Woody Wax can restore your riggers to close to new or keep them new looking and protect them from deteriorating! With the Woody Wax CPR System, (kit), your riggers will look new and stay that way for six months guaranteed!

Use Woody Wax the same as above, only leave Woody Wax on the riggers for a week before wiping off and sealing with Woody Wax Metal Sealant, (the longer Woody Wax has to penetrate the better the metal will look when sealed).